The design and verification of anchorage systems must be carried out according to the guidelines published on the EOTA website.
The documents that govern the different types of design are the following:
ETAG001 ANNEX C: Design and verification of post-installed mechanical anchors in concrete;
TR029: Design and verification of post-installed chemical anchors in concrete;
TR023: Design and verification of post-installed connections using chemical anchors;
TR045: Design and verification of post-installed anchors in case of seismic load:
TR020: Design and verification of post-installed anchors in case of fire load:
TR054: Design and verification of post-installed anchors on masonry.
All these documents can be downloaded free of charge from the EOTA website, which can be consulted via the link at the bottom of the page.
The EN1992-4 will soon be issued and therefore the design and verification of post-installed fixing systems will be carried out according to this document.
For any necessary clarifications you can contact our technical office.